Paint the Rainbow!

Tops and their finished look

After matching the tops and their handles with color, then at least two coats of shellac.  In between each coat you have to sand the layers to make sure there aren't any bumps.

Shellac is frowned upon currently because it reacts to water.  Think about the white rings on your grandmother's table.  BUT and this is HUGE shellac as a base coat provides great build or depth of color in the finish. 

What does that mean?  Depth of finish creates more refractive light to see the wood.  Or, it looks better. 

We use a poly as a top coat to protect against water and many other solvents like alcohol.  Solvents - dissolve finish.  Shellac is based in alcohol so if rubbing alcohol spills on it - it gets gooey and smudgey and basically ruins your day.

The is the bare handle                                                 Handle with color on it

 

 

 

In the last photo you can see how the colors blend into the bowl and look like a matching piece.  Some of the intensity is lost with applying another coat of shellac, snading that down with 600 grit sand paper and proceeding with the poly coats of finish. 

 

 

 

 

Color; what to do when you parts don't match

Color.  Sometimes we need to adjust the color.

In making Handles for shave bowls, sometimes we have to use regular maple instead of spalted.  Luckily, we have a source in Maine that rescues wood from a toy manufacturing plant and we can take those scraps in still make a wooden handle that is still up cycled from wood that could potentially end up in the trash.

The only "problem" is that the wood is light maple without any spalting.

So, the non color of the handle is much lighter than the bottom and would look hinkey.  In several handles are quite different than the bowls' lids:

The next posts will describe different ways to even out the color and it will produce handles that beautifully match the bowls and their tops.

Hello to the rest of the world!

Привет! Через статистика есть немало русских зрителей. Это слишком круто! Добро пожаловать, и я надеюсь, что вы оставить записку, чтобы поздороваться. Если Google Translate делает ошибки, прости меня.

Salut! Grâce à des statistiques il ya un bon peu de téléspectateurs français. C'est trop cool! Bienvenue et j'espère que vous laissez une note pour dire bonjour. Si google translate fait des erreurs, pardonnez-moi.

Hallo! Durch die Statistik Es gibt durchaus ein paar deutsche Zuschauer. Das ist zu cool! Willkommen und ich hoffe, Sie lassen eine Notiz Hallo zu sagen. Wenn Google Translate macht Fehler, vergib mir.

Hej! Genom statistiken finns en hel del svenska tittare. Det är för cool! Välkommen och jag hoppas du lämnar ett meddelande att säga hej. Om Google Translate gör fel, förlåt mig.

Cześć! Poprzez statystyki są sporo polskich widzów. To jest zbyt cool! Witamy i mam nadzieję zostawić notatkę się przywitać. Jeśli Google Translate popełnia błędy, wybacz mi.

Hi!  Through the stats there are quite a few American viewers.  That is too cool!  Welcome and I hope you leave a note to say hello.  If google translate makes errors, forgive me. 

From Rough to Round

Now that we have an approximate shape that is circular we can mount it on the lathe for the rounding out parts.

This is the blank mounted on the lathe.  You can see here one of the vertical cuts to remove the corner went a little too deep.  It's okay.  There is enough wood to make minor adjustments while it is on the lathe.

Eric at the lathe making the first passes.

Eric is at the lathe rounding and shaping.  Notice the tool rest this is where a turner rests their tools to ensure an even cut. 

This is the very roughed out bowl.  Now we can see the cool shapes and colors that will be part of the bowl.

Round and Round we go!

I am sure you have imagined we continue to process of making corners rounded. 

Just like before, the vertical cuts are made to make the excess wood easier to remove without the chance of it cracking or splitting off in unwanted ways.

This is the blank after the second corner.

As the excess is cut away, the grain and color patterns begin to appear.

The third corner is trimmed up.

The Fourth Corner is exactly the same process.  Once the rough circle has taken shape, we have to take it to the lathe for mounting and final rounding out.  More in the next post! 

From Block to Bowl

Or from square peg to round holder

I thought it would be nice to include you all in "the process".  Of course, wood starts out as a tree.  We're not going back that far.  We have an awesome source for turning blanks (fancy phrase for blocks of wood).  If you are in the market for blanks Gary at NC Woods is the best.  Great guy, great wood.  The website is http://www.ncwood.biz/.  They also have an ebay store.  I can recommend them without hesitation.  And no, I'm not shilling for them.

So, your blank starts out life as a block of wood.  In this case it is an Ambrosia Maple (Ambrosia explaination in previous posts) Maple, a nice tree.

Am = Ambrosia Green= lots of water

Curly = pattern in the grain possibly curly

The blank is marked with a circle to provide a guide for getting the edges off.  We then use the band saw to saw into the wood on the horizontal plane.  Cutting off the corners could be tricky.  The wood has the potential of cracking and splitting in unwanted places.  Thus resulting in sad faces.  Sure one could think that it would be nice to smoke meat on the grill with a nice maple, but well we fall in love with each piece as it takes shape. 

More tomorrow.  It is too much fun for one day :)  Thanks for checking in.  I would love to hear from you.

How to bring your Treasure Home

Some thing I haven't mentioned yet is how to bring home a Wooden Treasure. 

Etsy is where we  have our shop.  It's called Lovgren & Daughter.  This may not be breaking news.

Etsy's About Statement is: "Our mission is to empower people to change the way the global economy works. We see a world in which very-very small businesses have much-much more sway in shaping the economy, local living economies are thriving everywhere, and people value authorship and provenance as much as price and convenience. We are bringing heart to commerce and making the world more fair, more sustainable, and more fun."

Etsy provides a platform by which sellers can put their work, their art, the special pieces of yourself out into the web.  It is economical and a vibrant, supportive community of artists. 

In my personal experience, Etsians ROCK!  Fellow creaters can lift you up when your spirits are down, give advice, share another view, make suggestions when you are stuck creatively and share a cup of coffee. 

There are amazing artists and crafters.  One of my favorite woodworkers is: 

Jerry's Wood Works
He makes amazing beer tap handles.  This one is in purpleheart.  He does custom orders and you won't believe what he can do.

His shop is also on Etsy.  He also makes personalized drum sticks.

If you would like to find Lovgren & Daughter on Etsy follow this link:

http://www.etsy.com/shop/LovgrenandDaughter.  We also have a FB page if you would like to "Like" us.  We will be your friend.  Really.  Oh and we won't post 85 times a day.  It's annoying to receive them - I think so too.  Maybe once a week.  Just to say Hi :)